Setup guides / RTMP
Connect an RTMP camera or app to an IRLHost relay.
Some cameras and apps can only stream to a custom RTMP address, such as action cameras and drones with a custom RTMP option. Your relay accepts RTMP as well as SRT and SRTLA, so these devices can use it too. OBS pulls the feed from the relay and sends it to your channel.
How your stream reaches your channel
The relay has no Twitch or Kick setting. If you only point your camera or app at it, the signal shows up on your dashboard, but nothing reaches your channel until OBS is pulling the feed.
Set it up
- 1
Deploy your relay
Sign up, open Relay in your dashboard and click Create relay. Your relay runs in Falkenstein, DE. It is usually ready in a moment, and can take a few minutes. The badge shows RUNNING when it’s ready.
- 2
Copy the RTMP address
In the Stream URLs panel, under Send, pick the Other tab. It lists every address your relay takes, each labelled by protocol. Click Copy on the row labelled RTMP. Your stream key is part of the address. The key is masked on screen, but Copy gives you the real value, so don’t type it out by hand.
- 3
Point the camera or app at the relay
In the device’s app, choose its custom RTMP or RTMP URL option and paste the whole address. For example, GoPro’s Quik app can stream to an RTMP URL on HERO7 Black and later cameras. For where the option lives on your device, see its own documentation. Start streaming, and the Stream signal card on your dashboard changes to Receiving. Your channel isn’t live yet.
- 4
Pull the feed into OBS
Go to Receive at the bottom of Stream URLs and click Copy on the SRT address. In OBS, add a Media Source and paste the address into its Input field. Don’t use a Send address here: OBS needs the one with read: in its stream ID. On Pro with IRLHost Studio, click Use your IRLHost server in its setup and it fills in this address for you.
- 5
Send the stream from OBS to your channel
In OBS on your own PC, set up your Twitch, Kick or other destination the usual way. Your platform’s stream key goes in OBS, not in the camera. With IRLHost Studio, add up to 3 channels under Stream Destinations on the OBS Cloud page instead. Start the stream, and now you’re live.
What RTMP can’t do
RTMP has no bonding and no packet recovery. It sends over one connection, so a weak or changing mobile signal hurts it more than SRT, and more again than SRTLA with bonded connections.
If your app or encoder can send SRTLA, use that. If it can send SRT, use that. RTMP is for devices that offer nothing else. Your relay still helps here: OBS keeps running on a stable connection and can switch to a BRB scene when the camera drops.
If your app wants a server and a stream key separately
Some apps don’t take one full RTMP address and ask for a server and a stream key instead. Email support@irlhost.gg before you go live and we’ll help you fill them in.
On an older relay?
If your dashboard shows a Connection panel with tabs instead of Stream URLs, your relay runs on its own server and has no RTMP address. If your dashboard shows a Move your relay to our new servers banner, use it first. The stream URL and key change when you move, so don’t do it while you’re live. If there is no banner yet, email support@irlhost.gg and we’ll move you.
Optional: scene switching and chat commands
Your stream runs without these. To add them, connect your Twitch or Kick account under Config in your dashboard. They’re included on Plus and Pro.
Automatic scene switching
Under Config, name the OBS scenes to use for a stable stream, low bitrate and a lost connection. The scenes are yours, so a BRB scene has to exist in OBS before you can pick it. A state with no scene name causes no switch.
Chat commands
Control OBS from Twitch or Kick chat with commands like !scene, !start and !stop. You choose who can use each command. Those three are limited to the broadcaster until you change them.
IRLHost Link
Both features need something to act on. For OBS on your own PC, install IRLHost Link for Windows or macOS on that same computer. It carries no video, and it isn’t needed while OBS Cloud is running.
RTMP questions
Does my relay take RTMP on Plus?
Yes. Relays on our current servers accept RTMP on both Plus and Pro, on the same connection as SRT and SRTLA.
Is RTMP as good as SRTLA for IRL streaming?
No. RTMP has no bonding and no packet recovery, so it copes worse with a weak or changing mobile signal. Use SRTLA when your app supports it. RTMP is for cameras and apps that can’t send SRT.
Does the camera stream straight to Twitch or Kick through the relay?
No. The camera sends to the relay, and the relay has no Twitch or Kick setting. OBS pulls the feed from the relay and sends it to your channel, either on your own PC or as IRLHost Studio on Pro. Until that part is set up, the signal shows on your dashboard but nothing reaches your channel.
Which plan do I need for an RTMP camera?
If you run OBS on your own PC, IRLHost Plus at €11.99/month + VAT covers it, with your private relay, automatic scene switching, chat commands and IRLHost Link. IRLHost Pro at €29.99/month + VAT adds IRLHost Studio, which runs OBS in the cloud for up to 300 hours a month at 30 FPS. It can stream to up to 3 destinations at once, chosen from Twitch, Kick, YouTube and Custom RTMP.
Does this work with Twitch and Kick?
Yes. The relay works with any platform that accepts RTMP or SRT, since OBS does the sending. Chat commands work on Twitch and Kick only, on one platform at a time.
Related
Stuck on your setup? Email support@irlhost.gg or read the FAQ.
Get started