Setup guides / Moblin
Connect Moblin to an IRLHost relay.
Moblin is a free iOS app for IRL streaming that can send SRTLA and bond cellular and Wi-Fi connections. Your dashboard gives you a QR code that adds the stream to Moblin, so there are no fields to fill in. OBS then pulls the feed from the relay and sends it to your channel.
How your stream reaches your channel
The relay has no Twitch or Kick setting. If you only point Moblin at it, the signal shows up on your dashboard, but nothing reaches your channel until OBS is pulling the feed.
Set it up
- 1
Deploy your relay
Sign up, open Relay in your dashboard and click Create relay. Your relay runs in Falkenstein, DE. It is usually ready in a moment, and can take a few minutes. The badge shows RUNNING when it’s ready.
- 2
Copy your connection details
In the Stream URLs panel, under Send, pick the Moblin tab. It shows a QR code and an Open in Moblin button. Both carry your full SRTLA address and key, so you don’t copy anything by hand.
- 3
Point Moblin at the relay
Scan the QR code with your iPhone camera, or tap Open in Moblin if you have the dashboard open on the phone. Moblin adds a stream named IRLHost, with the video codec set to H.265/HEVC. For bonding, turn on more than one connection in Moblin, such as cellular and Wi-Fi. See the Moblin documentation for where that setting lives. Start streaming, and the Stream signal card on your dashboard changes to Receiving. Your channel isn’t live yet.
- 4
Pull the feed into OBS
Go to Receive at the bottom of Stream URLs and click Copy on the SRT address. In OBS, add a Media Source and paste the address into its Input field. Don’t use a Send address here: OBS needs the one with read: in its stream ID. On Pro with IRLHost Studio, click Use your IRLHost server in its setup and it fills in this address for you.
- 5
Send the stream from OBS to your channel
In OBS on your own PC, set up your Twitch, Kick or other destination the usual way. Your platform’s stream key goes in OBS, not in the encoder. With IRLHost Studio, add up to 3 channels under Stream Destinations on the OBS Cloud page instead. Start the stream, and now you’re live.
On an older relay?
If your dashboard shows a Connection panel with tabs instead of Stream URLs, open the Moblin tab. It has the same QR code and Open in Moblin button, or you can copy the Server Address and Stream ID. For OBS, use the OBS tab and copy the SRT Read URL.
Optional: scene switching and chat commands
Your stream runs without these. To add them, connect your Twitch or Kick account under Config in your dashboard. They’re included on Plus and Pro.
Automatic scene switching
Under Config, name the OBS scenes to use for a stable stream, low bitrate and a lost connection. The scenes are yours, so a BRB scene has to exist in OBS before you can pick it. A state with no scene name causes no switch.
Chat commands
Control OBS from Twitch or Kick chat with commands like !scene, !start and !stop. You choose who can use each command. Those three are limited to the broadcaster until you change them.
IRLHost Link
Both features need something to act on. For OBS on your own PC, install IRLHost Link for Windows or macOS on that same computer. It carries no video, and it isn’t needed while OBS Cloud is running.
Moblin questions
Does Moblin stream straight to Twitch or Kick through the relay?
No. Moblin sends to the relay, and the relay has no Twitch or Kick setting. OBS pulls the feed from the relay and sends it to your channel, either on your own PC or as IRLHost Studio on Pro. Until that part is set up, the signal shows on your dashboard but nothing reaches your channel.
What does the QR code set up in Moblin?
It adds a stream named IRLHost that points at your relay over SRTLA, with your stream key included and the video codec set to H.265/HEVC. You can change other settings in Moblin afterwards.
Should Moblin use SRT or SRTLA?
Your relay takes both on the same connection. The QR code uses SRTLA when your relay offers it. Use SRTLA with more than one connection turned on if you want bonding: when one link weakens, the other carries the stream.
Do I need a second connection if I also use another app or encoder?
No. A connection has one path and one stream key, and SRT and SRTLA share it, so changing encoder doesn’t need another one. Plus includes one relay connection.
Which plan do I need for Moblin?
If you run OBS on your own PC, IRLHost Plus at €11.99/month + VAT covers it, with your private relay, automatic scene switching, chat commands and IRLHost Link. IRLHost Pro at €29.99/month + VAT adds IRLHost Studio, which runs OBS in the cloud for up to 300 hours a month at 30 FPS. It can stream to up to 3 destinations at once, chosen from Twitch, Kick, YouTube and Custom RTMP.
Does this work with Twitch and Kick?
Yes. The relay works with any platform that accepts RTMP or SRT, since OBS does the sending. Chat commands work on Twitch and Kick only, on one platform at a time.
Related
Stuck on your setup? Email support@irlhost.gg or read the FAQ.
Get started