Setup guides / IRL Pro

Connect IRL Pro to an IRLHost relay.

IRL Pro sends from your Android phone to a private relay over SRTLA, which can combine Wi-Fi and mobile data into one stream. OBS then pulls the feed from the relay and sends it to your channel. There’s no server for you to host and no port to forward.

Get startedCompare plans

How your stream reaches your channel

  1. 1

    IRL Pro

    Sends your stream to the relay over SRT or SRTLA.

  2. 2

    IRLHost relay

    Takes in the feed and gives OBS an address to pull it from.

  3. 3

    OBS

    Pulls the feed. Runs on your own PC, or in the cloud on Pro.

  4. 4

    Your channel

    OBS sends the stream to Twitch, Kick or another platform.

The relay has no Twitch or Kick setting. If you only point IRL Pro at it, the signal shows up on your dashboard, but nothing reaches your channel until OBS is pulling the feed.

Set it up

  1. 1

    Deploy your relay

    Sign up, open Relay in your dashboard and click Create relay. Your relay runs in Falkenstein, DE. It is usually ready in a moment, and can take a few minutes. The badge shows RUNNING when it’s ready.

  2. 2

    Copy your connection details

    In the Stream URLs panel, under Send, pick the IRL Pro tab. It shows the protocol, host, port and stream ID as separate fields, each with a Copy button, and the full address underneath. The key is masked on screen, but Copy gives you the real value, so don’t type it out by hand.

  3. 3

    Point IRL Pro at the relay

    Set the IRL Pro destination to SRTLA and enter the address you copied. If the app asks for separate fields, split the address as shown below. For bonding, enable more than one connection, such as Wi-Fi and mobile data. Start streaming, and the Stream signal card on your dashboard changes to Receiving. Your channel isn’t live yet.

  4. 4

    Pull the feed into OBS

    Go to Receive at the bottom of Stream URLs and click Copy on the SRT address. In OBS, add a Media Source and paste the address into its Input field. Don’t use a Send address here: OBS needs the one with read: in its stream ID. On Pro with IRLHost Studio, click Use your IRLHost server in its setup and it fills in this address for you.

  5. 5

    Send the stream from OBS to your channel

    In OBS on your own PC, set up your Twitch, Kick or other destination the usual way. Your platform’s stream key goes in OBS, not in the encoder. With IRLHost Studio, add up to 3 channels under Stream Destinations on the OBS Cloud page instead. Start the stream, and now you’re live.

If IRL Pro wants separate fields

Everything comes from the one SRTLA address you copied, which has this shape:

srtla://your-relay-host:port?streamid=publish:your-path:::your-key

Protocol
SRTLA
The part before ://
Host
your-relay-host
Between :// and the colon
Port
port
The number after the host
Stream ID
publish:your-path:::your-key
Everything after streamid=

On an older relay?

If your dashboard shows a Connection panel with tabs instead of Stream URLs, open the IRL Pro tab. It lists Protocol SRTLA, Host, Port 5000 and Stream ID, with a Copy All button. For OBS, use the OBS tab and copy the SRT Read URL.

Optional: scene switching and chat commands

Your stream runs without these. To add them, connect your Twitch or Kick account under Config in your dashboard. They’re included on Plus and Pro.

Automatic scene switching

Under Config, name the OBS scenes to use for a stable stream, low bitrate and a lost connection. The scenes are yours, so a BRB scene has to exist in OBS before you can pick it. A state with no scene name causes no switch.

Chat commands

Control OBS from Twitch or Kick chat with commands like !scene, !start and !stop. You choose who can use each command. Those three are limited to the broadcaster until you change them.

IRLHost Link

Both features need something to act on. For OBS on your own PC, install IRLHost Link for Windows or macOS on that same computer. It carries no video, and it isn’t needed while OBS Cloud is running.

IRL Pro questions

Does IRL Pro stream straight to Twitch or Kick through the relay?

No. IRL Pro sends to the relay, and the relay has no Twitch or Kick setting. OBS pulls the feed from the relay and sends it to your channel, either on your own PC or as IRLHost Studio on Pro. Until that part is set up, the signal shows on your dashboard but nothing reaches your channel.

Why don’t I see an IRL Pro tab in my dashboard?

It sits in the **Stream URLs** panel, under **Send**. Pick **IRL Pro** there to get the host, port and stream ID as separate fields.

Should IRL Pro use SRT or SRTLA?

Your relay takes both on the same connection. Use SRTLA with more than one connection enabled if you want bonding: when one link weakens, the other carries the stream. Plain SRT sends over a single connection.

Do I need a second connection if I also use another app or encoder?

No. A connection has one path and one stream key, and SRT and SRTLA share it, so changing encoder doesn’t need another one. Plus includes one relay connection.

Which plan do I need for IRL Pro?

If you run OBS on your own PC, IRLHost Plus at €11.99/month + VAT covers it, with your private relay, automatic scene switching, chat commands and IRLHost Link. IRLHost Pro at €29.99/month + VAT adds IRLHost Studio, which runs OBS in the cloud for up to 300 hours a month at 30 FPS. It can stream to up to 3 destinations at once, chosen from Twitch, Kick, YouTube and Custom RTMP.

Does this work with Twitch and Kick?

Yes. The relay works with any platform that accepts RTMP or SRT, since OBS does the sending. Chat commands work on Twitch and Kick only, on one platform at a time.

Related

Belabox setup →The same relay, from a hardware encoder.Set up SRTLA with Moblin →The guide for iPhone streamers.How IRLHost works →The relay, scene switching, IRLHost Link and Studio.

Stuck on your setup? Email support@irlhost.gg or read the FAQ.

Get started