Setup guides / OBS

Send from OBS on a laptop to an IRLHost relay.

If you stream from a laptop running OBS, it can send SRT to a private relay. A second OBS, on your PC at home or in the cloud with IRLHost Studio on Pro, pulls the feed from the relay and sends it to your channel. That second OBS is where automatic scene switching and chat commands act.

Get startedCompare plans

How your stream reaches your channel

  1. 1

    OBS on your laptop

    Sends your stream to the relay over SRT.

  2. 2

    IRLHost relay

    Takes in the feed and gives OBS an address to pull it from.

  3. 3

    OBS

    Pulls the feed. Runs on your own PC, or in the cloud on Pro.

  4. 4

    Your channel

    OBS sends the stream to Twitch, Kick or another platform.

The relay has no Twitch or Kick setting. If you only point OBS on your laptop at it, the signal shows up on your dashboard, but nothing reaches your channel until OBS is pulling the feed.

Set it up

  1. 1

    Deploy your relay

    Sign up, open Relay in your dashboard and click Create relay. Your relay runs in Falkenstein, DE. It is usually ready in a moment, and can take a few minutes. The badge shows RUNNING when it’s ready.

  2. 2

    Copy the SRT Send address

    In the Stream URLs panel, under Send, pick the Other tab and click Copy on the row labelled SRT. Use the Send address here, the one with publish: in its stream ID. The key is masked on screen, but Copy gives you the real value, so don’t type it out by hand.

  3. 3

    Point the laptop’s OBS at the relay

    In OBS on the laptop, go to Settings > Stream and set Service to Custom. Paste the whole address into the Server field and leave Stream Key empty: the key is already part of the address. Start streaming, and the Stream signal card on your dashboard changes to Receiving. Your channel isn’t live yet.

  4. 4

    Pull the feed into your main OBS

    On the PC that sends to your channel, go to Receive at the bottom of Stream URLs and click Copy on the SRT address. In that OBS, add a Media Source and paste the address into its Input field. Don’t use a Send address here: this OBS needs the one with read: in its stream ID. On Pro with IRLHost Studio, click Use your IRLHost server in its setup and it fills in this address for you.

  5. 5

    Send the stream from your main OBS to your channel

    In the OBS that pulls the feed, set up your Twitch, Kick or other destination the usual way. Your platform’s stream key goes there, not on the laptop. With IRLHost Studio, add up to 3 channels under Stream Destinations on the OBS Cloud page instead. Start the stream, and now you’re live.

Why put a relay between the laptop and your channel?

A laptop on mobile data or venue Wi-Fi drops out from time to time. With the relay in between, your main OBS keeps running on a stable connection, so it can switch to a BRB scene when the laptop’s signal drops and switch back when it returns. Viewers see your BRB scene instead of an ended stream.

OBS sends plain SRT over one connection. If you need to bond several connections, use an encoder that sends SRTLA, such as Belabox, Moblin or IRL Pro.

Optional: scene switching and chat commands

Your stream runs without these. To add them, connect your Twitch or Kick account under Config in your dashboard. They’re included on Plus and Pro.

Automatic scene switching

Under Config, name the OBS scenes to use for a stable stream, low bitrate and a lost connection. The scenes are yours, so a BRB scene has to exist in OBS before you can pick it. A state with no scene name causes no switch.

Chat commands

Control OBS from Twitch or Kick chat with commands like !scene, !start and !stop. You choose who can use each command. Those three are limited to the broadcaster until you change them.

IRLHost Link

Both features need something to act on. For OBS on your own PC, install IRLHost Link for Windows or macOS on that same computer. It carries no video, and it isn’t needed while OBS Cloud is running.

OBS questions

Why is the Stream Key field empty in the laptop’s OBS?

The stream ID and key are part of the SRT address you paste into Server. OBS’s own SRT guide also says to leave Stream Key empty for SRT.

Can the laptop’s OBS send straight to Twitch or Kick through the relay?

No. The relay has no Twitch or Kick setting. Another OBS pulls the feed from the relay and sends it to your channel, either on your own PC or as IRLHost Studio on Pro. Until that part is set up, the signal shows on your dashboard but nothing reaches your channel.

Where do scene switching and chat commands run?

On the OBS that pulls the feed. For OBS on your own PC, install IRLHost Link on that PC. On Pro, they can act on IRLHost Studio while it runs. They don’t control the laptop’s OBS.

Which plan do I need for OBS?

If you run OBS on your own PC, IRLHost Plus at €11.99/month + VAT covers it, with your private relay, automatic scene switching, chat commands and IRLHost Link. IRLHost Pro at €29.99/month + VAT adds IRLHost Studio, which runs OBS in the cloud for up to 300 hours a month at 30 FPS. It can stream to up to 3 destinations at once, chosen from Twitch, Kick, YouTube and Custom RTMP.

Does this work with Twitch and Kick?

Yes. The relay works with any platform that accepts RTMP or SRT, since OBS does the sending. Chat commands work on Twitch and Kick only, on one platform at a time.

Related

Belabox setup →Bond several connections with a hardware encoder.SRT vs RTMP for IRL streaming →Which protocol to pick and why.How IRLHost works →The relay, scene switching, IRLHost Link and Studio.

Stuck on your setup? Email support@irlhost.gg or read the FAQ.

Get started